A Quick Guide on How to Install Bike Pedals

Comfort and safety are two of the most important things when you are riding a bike. To be sure of these two things, you need to have the right components and see to it that they are well-maintained. The right seat, tires, handlebars, and shifters, among others, will be important considerations. In the same way, you also have to make sure that your pedals are in excellent condition. With this, in the rest of this post, we will let you know how to install bike pedals. Whether it is for a new bike or when you are replacing the pedals of your current bike, you need to do this the right way. Keep on reading and we’ll teach you how this can be done in a snap.

How to Install Bike Pedals

The installation of bike pedals does not need to be a complicated task, provided that you know the right steps. Before you install new pedals, the first thing that you have to do is to remove the one that is currently installed in the bike. With this, the following are the things that you should do:

  • Have the bike mounted in a repair stand. This will put it in a stable position, making it easier for you to accomplish the job. Set it in the largest chain ring to minimize the possibility of suffering from cuts.
  • Have the bike rotated until you can have access to the right pedal.
  • Using your wrench, turn it around until the pedal is loosened. This can be best done at an angle of 90 degrees or below. Turn it clockwise until the pedal is already removed. Repeat the same step on the left pedal.
  • You can now turn the bike to a position where you can have easy access to the crank to proceed with the installation of the new pedal.

Now that you have successfully removed the pedal, you should now proceed with the installation. Here are the simple steps to do this successfully:

  • Apply waterproof grease on the threads. This will provide the lubrication that is necessary for the easier installation of the new pedals.
  • With the use of wrench flats, thread the right pedal on the right side of the crank. Make sure to have it secured in a tight position. Turn the wrench until it completely stops, which means that the pedal is already snug.
  • Repeat the same process on the opposite side of the crank to install the left pedal.

Tips in Replacing Bike Pedals

To make the task easier, the following are some of the tips that you should keep in mind:

  • Find a stable surface: This will make it easier for you to work on the pedals and will lessen the possibility that you will suffer from cuts.
  • Apply heat: This is specifically the best solution if in case the pedals are frozen or stuck. Take note, however, that the application of heat should be done on the crank arm and not the pedal itself. This is also not to be done if you have rubber or plastic seals as this will obviously cause the latter to melt.
  • Use a liquid wrench: This will act as a penetrant, which will make it easier to loosen the components on the crank set. Again, this is going to be an ideal solution if you are dealing with stuck or frozen pedals.
  • Take care of the screws and bolts: Once you have removed the existing pedals, keep all components in a safe place so that you will not lose them when it is time to have the new pedals installed.

Types of Bikes Pedals

It is not enough that you know how to install bike pedals. It is also essential to know which type of bike pedals will make the best replacement for the one that you currently have. In this case, the following are the options that can be taken into consideration:

  • Flat Pedals: Chances are, this is the type of pedal that you had in your first bike. The surface is stable and it is compatible with any type of shoe when you are riding. This is a good choice for downhill riders, provided that you are using the right footwear.
  • Touring Pedals: This is the right choice if you are looking for additional power in your bike. This can offer the benefit of flexibility that you can expect from a flat pedal. One of the best things about this is that there is no specific type of shoe that should be worn in order to optimize its performance.
  • Clipless Pedals: As the name implies, in this type of pedal, there is no clip where your toe will be attached. This is ideal for long distance and frequent rides. In the case of this design, your legs and feet will be an extension of the bike, providing the power that is needed to have it propelled.
Click Here to Leave a Comment Below 3 comments
Stramipz - a couple of years ago

Hey Buddy

Great Article! You are clear about install bike pedals.I was confusion about that, I didn’t know how to that it. Thanks for your good informative content.

Best Of Luck

Stramipz - a couple of years ago

Hey Tati Cycles

Great Article!!!

I think you could share a good informative content about pedals of bike. It’s also important parts of bikes accessories.


BestFausto - last year

I have noticed you don’t monetize taticycles.com, don’t waste your traffic, you can earn extra
bucks every month with new monetization method.
This is the best adsense alternative for any type of website (they approve all websites),
for more info simply search in gooogle: murgrabia’s tools


Leave a Reply: