• Home  / 
  • How to
  •  /  How To Remove Crankset and Other Tips You Should Know

How To Remove Crankset and Other Tips You Should Know

Are you interested in knowing how to remove crankset? Or, do you even know what crankset is? Do you know how to take care of it? Since it is one of the most vital parts of your bike, it is important that you know how to successfully deal with it. Having it removed is not a complicated task. You do not need to pay a local mechanic or repairman to do the job for you. You can complete it on your own, provided that you know how it can be done. With this, keep on reading the rest of this post and we will share with you some valuable insights that you should know!

how to remove crankset

What is a Crankset?

Before we proceed with the discussion on how you can effectively remove a crankset, it is first important to define what it is. Just in case you do not know, it refers not to a single part, but to a collection of different parts, all of which are working with each other. These are essentially the parts of the bike that will take power from your legs as you pedal, and in turn, it will be converted into motion that will propel you to move from one place. It is composed of pedals, chains, and sprockets, among others.

How to Remove Crankset

We will now proceed to the most important part of this post and will provide you with quick insights on how it can be done. It might seem to be a complicated task at first, especially for someone who is uninformed of how it can be accomplished. Once you are aware of the fundamentals, however, you will realize that doing so is indeed a piece of cake.

It is also important to keep in mind that the steps in removing a crankset can be different depending on the type of bike that you are using or its manufacturer. Generally speaking, however, the steps that will be mentioned below will be applicable for most bikes.

  • If the removal is going to be done on the right side, take out the shell and allow it to sit on the bottom.
  • Take out the dust cover or the cap that covers the crank bolt. You can have it removed with the use of an appropriate tool based on the design of the cap. You might need a screwdriver or allen wrench to do this successfully.
  • Take out the bolt or the nut attached to the crank arm. This is a crucial step and is often forgotten by many people. When you forget to do this, the succeeding steps will be a lot harder for you to accomplish. Have it unscrewed and check if there is a washer inside. If you can see one, have it removed.
  • Using the crank puller, pull out the crank arm. The puller that will be sued will vary depending if it is nuts or bolts that you have to remove.
  • By now, you already have removed the crank successfully! Make sure that all parts are kept in a safe place and organized so that you can easily find them when you have to bring back the crank set.

Tips in Taking Care of your Crankset

Taking Care of your Crankset

In most instances, you need to have it removed because it is going to be replaced with a new ones. To make sure that a replacement will not be warranted within just a short period, keep in mind the things that will be mentioned below, which will make it easier to have a well-maintained crankset.

  • Regular inspection will be necessary. Take a look at the different parts to make sure that there are no dents, cracks, and any other damages. Any problem should be resolved the soonest to avoid compromising performance and to prevent costlier repairs in the future.
  • Have it regularly cleaned. This might seem to be too tasking, but this will do a lot to be able to maintain the superiority of your crankset. This is especially important if you have biked in muddy surfaces. Dirt and grime should be removed. Using a power sprayer can be a big help. A stiff brush can also work well.
  • Keep it dry. Before storing the bike and after it is cleaned, have the crankset thoroughly inspected to make sure that there are no traces of dirt left. Dry it out before putting it back in the storage.
  • Get rid of rust. You are most probably wondering how this can be done. Bathe the crankset in soda. It might sound silly, but this is actually effective in terms of making the crankset less prone to rusting. There are also commercially-available products, which can be promising in terms of making sure that you will be able to effectively deal with rust.
Click here to add a comment

Leave a comment: