Tips on How to Remove a Bicycle Crank

The crank is one of the most important parts of your bike, which is why it is important to make sure that it is well-maintained. Regular cleaning is a must. For discerning users, they decide to upgrade their crank with one that is powerful and one that can handle their demands. In this case, keep on reading the rest of this post and we will provide you with insights on how to remove a bicycle crank. By knowing how this can be done, it will be easier for you to work on the crank and do what needs to be done – whether you want to have it cleaned or if there are parts that need to be replaced.

How to Remove a Bicycle Crank

Initially, you might think that this is a complicated task. Yes, it can be difficult, but only if you have no idea on how this can be done. Here are the simple steps that should be followed in removing the crank of your bike.

  • Start by placing the bike in a stand. This will put it in a stable position, which will make it easier for you to remove the crank.
  • Next, have the front derailleur shifted to the smallest chain ring. Have the chain removed and put it on the bottom bracket of the bike.
  • Hold the crank arm with the use of a single hand while the other hand will be used to remove the bolt. This can be done with the use of either 14mm socket wrench or 8mm Allen wrench.
  • Have the threads turned counterclockwise, which will make it possible for you to have the crank puller extended. Have the outer part threaded. While you are holding the crank arm, have the internal driver turned clockwise until it comes to a complete stop.
  • Using a large adjustable wrench, have it placed on the flat portion of the crank arm puller. Have it held in place and have the internal driver turned clockwise with the use of your 16mm wrench. Repeat this with the other side of the crank arm.
  • Have the lock ring loosened with the use of a wrench. Have the left bearing race removed, as well as the bottom bracket. By now, you have fully removed the crank arm of the bike. Make sure to keep all of the parts together so that they can be easily accessed when it is about time to have the crank arm returned.

Tips in Cleaning your Bike’s Crank

It is not enough that you are aware of how to remove a bicycle crank. To be a responsible bike owner and to keep it in its tip-top shape, make sure that it is properly cleaned, which can be done by following the tips that will be mentioned below.

· Do it regularly. While this does not mean that you should be cleaning the crank daily, it should be done based on a religious schedule. This means that you should have a routine, such as cleaning it once a month, depending on the extent of its use.

· Do it before storing the bike. If you are keeping the bike in the storage room, such as because it is winter and you won’t be using it, make sure that it is given deep clean first. Do this to prevent dirt and grime from hardening. Once they harden, they will be harder to remove and they will inevitably have a negative impact on the performance of the crank of your bike.

· Have it Lubricated. This should be done not only in the crank, but the entire set of the drivetrain, which will include rings, chain, and derailleur, among others. When applying lube, take note of which one has been lubed first. Allow some time for the lubricant to settle in before it is wiped off.

· Use a stiff brush and solvent. This will make it possible for you to be more thorough in the cleaning procedure. Never use a power sprayer as this can affect the different parts of the crankset. Concentrate on brushing the areas with dirt and mud to avoid such from being stuck and from creating squeaky noise. You can also attach a Q-tip at the end of a screwdriver so that you can easily clean areas that are hard to reach.

Indeed, cleaning and removing the crank of your bike is not a complicated task. Just follow the steps that we have mentioned above. In the same way that you exert meticulous care in its removable, make sure to be as thorough as possible in its installation. If it is not assembled properly, the performance of the bike will be compromised, especially your safety. Make sure to have the crankset well-maintained to enjoy optimal performance from your bike even through the years.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: